← All apps

Printer not working on Windows

Windows will tell you the printer is offline, or that the driver is unavailable, or it will say nothing at all and simply not print. Those are three different faults in three different places - which is why reinstalling the driver usually changes nothing.

Get PrinterFix from the Microsoft Store

Where a print job actually dies

A print job goes from the application to the print spooler service, into the print queue, through the driver, down the port (USB or network) and out to the device. Any link in that chain can stop it, and Windows reports all of them with the same shrug.

What you seeWhere the fault usually isFirst check
Nothing happens, no errorPrint Spooler service stopped or set to Manual services.msc → Print Spooler → Running, Automatic
A job sits at "Deleting" or "Printing" foreverOne stuck job holding every job behind it Print queue window → cancel it; if it will not go, clear the spool folder with the service stopped
"Printer is offline"The offline flag is set, or the port no longer exists Queue window → clear "Use Printer Offline"; Printer properties → Ports
"Driver is unavailable"Driver missing, or a 32-bit driver on a 64-bit system Windows Update optional updates → Microsoft Update Catalog → vendor site
It prints, but to the wrong deviceDefault printer changed, or a virtual queue (PDF, OneNote, redirected) took the job Settings → Printers & scanners → "Let Windows manage my default printer"
One printer works, another does notPer-printer port or driver, not the spooler Compare the Ports tab of both printers

The order matters

Most "fix your printer" advice starts with reinstalling the driver. That is the slowest step and the least likely cause: a stopped spooler and a stuck job account for most of it, and both take seconds to check.

  1. Is the Print Spooler running? If it is stopped, jobs queue up and nothing prints.
  2. Is a job stuck in the queue? One stuck job blocks everything behind it. Clearing the queue discards those jobs - they are gone, not paused.
  3. Is the offline flag set? Windows stores it per printer and does not always clear it when the device comes back.
  4. Is the port the right one? A USB printer plugged into a different socket can enumerate as a new device with a new port, leaving the old queue pointing at nothing.
  5. Is the driver present and the right architecture? Only now does reinstalling it make sense.
  6. Is the device itself healthy? Paper, toner, a jam, a fuser error - hardware, and no software setting clears them.

When the queue refuses to clear

If a job will not delete, the spooler has to be stopped before the spool folder can be emptied. Otherwise Windows holds the file open, the deletion fails, and the job reappears. That one skipped step is why "clear the queue" so often appears not to work.

What PrinterFix does, and what it deliberately does not

PrinterFix runs the checks above in that order and states, in one sentence per item, what it found and what it affects. Diagnosis is read-only: nothing changes until you press repair, and the repair screen lists every action before any of it runs.

It does not download drivers. When one is missing it says whether it comes from Windows Update, the Microsoft Update Catalog or the vendor's site, and opens that page. The file, and the decision to install it, stay with you.

Repairing the spooler needs administrator rights, so Windows shows one elevation prompt when you start a repair; the app itself opens without them. It runs offline - no telemetry, no account, no uploads. Free for one printer per task; the optional Pro add-on adds batch repair, a restore point taken before the repair, and a PDF report.

What this cannot fix

A printer that is out of toner, has a paper jam, a failed fuser or a dead network port is a hardware problem. So is a print head that has dried out. Software can tell you the device is not answering; it cannot repair it. If the checks above all pass and nothing prints, the next step is the device's own self-test page, not another round of driver reinstalls.

Questions

Why does Windows say the printer is offline when it is switched on?

The offline flag is stored per printer, and Windows does not always clear it when the device answers again. Check the Ports tab as well: if the port no longer exists - a USB printer moved to another socket, or a network printer whose address changed - the queue points at nothing and stays offline no matter what the device does.

Does clearing the print queue delete my documents?

Yes. Jobs in the queue are discarded, not paused, and you will have to print them again. That is why PrinterFix lists the actions before running them, so you can see that clearing the queue is part of the repair.

Will reinstalling the driver fix it?

Usually not on its own. A stopped spooler, a stuck job and the offline flag are more common and take seconds to check. Reinstall the driver after those are ruled out, and get it from Windows Update, the Microsoft Update Catalog or the vendor's site rather than a driver-download site.

Related guides